Auto Air Conditioner Parts of Car Condensor

Auto Air Conditioner Parts of Car Condensor

                      Micro channel parallel movement radiator expert producer


The condenser-a component of the air conditioning circuit-is integrated into the motor cooling module, in which it is employed to great down and condense the compressed, gaseous refrigerant from the compressor. We make brazed, flat tube condensers that provide higher overall performance in spite of their compact and lightweight layout. They ensure rapid cooling of the passenger compartment thanks to ideal matching of heat transfer and stress drop on equally the coolant and the air aspect.

The condenser is a warmth exchanger in a cell A/C system. Today, condensers are generally manufactured of aluminum, but in the past, some ended up made of copper/brass. Condensers seem really significantly like radiators, just a little thinner, and since they also count on air flowing through them, are generally situated in entrance of the radiator.
Like radiators and evaporators, condensers are also built as a collection of tubes with fins around them. its  job is to release warmth. More especially, to launch the heat the refrigerant absorbed whilst it was flowing via the evaporator, quite considerably the very same way the radiator releases the warmth from engine coolant that the coolant absorbed while it was flowing through the engine. The refrigerant enters the condenser as a higher-strain vapor, but as it flows by means of the condenser and cools, it turns back into a cooler large-force liquid.

Solution features
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance 
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory

Company Advantage
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
2. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
four. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
5.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
7.Only when we have an independent team with high efficiency can we satisfy CZPT demands.  

OUR SERVICES 
Extended term organization is primarily based on our trusted services, quickly react and our specialist expertise to Vehicle AC. We are going to become your associate, not just your provider.
1.CAD Drawing, and mould layout foundation on your sample
two.Mould examination and sample verification before mass manufacturing.
three.CZPTers of a variety of transport traces.
4.aggressive freight provides and a single-cease service on clearing, delivery issues.
FAQ

Q1. Are you a manufacturing unit or buying and selling company? A: we are a self -possess manufacturing facility, we offer 1-cease service for our customers, from spare parts to condenser, from specialized sales to shipping and delivery and to following-product sales, so as to save the price for client, control the top quality and direct time, offer the very best providers
Q2: The place is your manufacturing unit located? How can I pay a visit to there? A: Our manufacturing facility is situated in  HangCZPT, Shan dong, China.
The nearest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
Q3. What’s the generation time for new molds and mass production? A: 7-ten times to develop the new moulds, mass creation requires about twenty-25days for a single 20gp,twenty five-30days for a single 40hq, can procedure urgently if need.
This autumn: What is the payment conditions? A: Telegraphic Transfer (T/T) and Letter of Credit rating (L/C).
Q5: Can you ship me samples? A: Of course, Samples are for free, and freight is on your facet.

 

Auto Air Conditioner Parts of Car Condensor